Drag Mod

A sleek and stylish vape mod, with extra GENE-ius.

The VooPoo GENE chip is one of the most advanced on the market. It fires in 25 milliseconds (0.025 seconds) and enables cutting-edge features like Super mode.

Super mode is one of the DRAG’s most exciting features. It activates automatically when you hit 130 watts and smooths out your hit, allowing you to inhale bigger clouds without risking an embarrassing cough.

Highly advanced GENE chip
Instant firing
Super mode
Intelligent atomizer detection
The regulated mod has an accurate temperature control feature for Nickel 200, Titanium, NiChrome and Stainless Steel 316 builds.

It also has an intelligent atomizer detection facility that can recognize a new atomizer’s optimum wattage – tailoring the vapor and flavor production to your build.

As with the market-leading DNA/Evolv chips, the GENE’s settings can be customized to your needs using the VooPoo PC App for Windows.

The mod yields a maximum of 157 watts of power from two vape batteries. The battery compartment is covered by a large pull-away side panel – and protected by four strong magnets that keep the panel from falling off and getting lost.

On the opposite side of the mod you’ll find the DRAG’s most striking design feature, a beautiful resin panel in a series of unique colorways.

The rest of the mod’s design is simple yet highly functional. It has three concave buttons and a minimalist screen.

The shape of the DRAG makes it easier to hold, with two shaved corners placed perfectly for both left and right-handed vapers.

With overcharge protection, over-discharge protection, short-circuit protection and more in-built safety features, you can relax with the DRAG in your pocket or in the hands of a loved one.

VooPoo DRAG Mod contents
VooPoo DRAG Mod
USB cable
User manual
Warranty card
VooPoo DRAG Mod features
Power: 5-157W
Battery: 2 x 18650 (Not Included)
Size: 90mm x 54mm x 24mm
GENE chip
0.025s firing time
Super mode
Intelligent atomizer recognition
Innovative power compensation mode
Lowest resistance in power mode: 0.05Ω
Lowest resistance in TC mode: 0.05Ω
TC MODE: SS, NI, TI，NC, TCR, CCR
VooPoo Drag Mod Specifications:
Variable Wattage Range: 1.0w to 157.0w
2 x 18650 high-drain batteries (Not Included)
Supports Nickel, Titanium, and Stainless Steel in Temperature Control
TCR Mode
OLED Screen
Resin Plate
Temperature Adjustment Range: 200°F-600°F
Minimum Resistance 0.05 in Temperature Control and 0.10 in Wattage Mode
Micro USB Port
Customizable Settings
Firmware Upgradeable
Low Voltage Protection
Short Circuit Protection
VooPoo Drag Mod Box Contains:
1 x VooPoo Black Frame Drag Mod – Resin
1 x Micro USB Cable

Additional Help & Advice
Vape starter kits can require a significant amount of technical knowledge to function correctly and safely. At vaping.com we recommend you make sure you read all the instructions before firing up your device for the first time.

It’s generally safer to use an external battery charger if you as using a device with 18650 batteries. The reason for this is that you protect against wearing out your micro USB port and most external battery chargers deliver more balanced charge which prolongs the life of the battery and the device. Always ensure that you never use damaged batteries in either your device or separate charger as battery wrapping protects the device. If your device uses dual or triple battery configurations make sure you use the same brand of batteries with the same level of charge.

Make sure if you’re using the temperature control feature on your device that the vape coils your using are compatible. For example nickel, titanium, or stainless steel are safe for TC.

Please be aware that there is always a slight risk when using rechargeable batteries. Make sure batteries are never left charging unattended. Always keep your batteries in a container that is non-conductive to reduced risk. When moving batteries in and out of your device or charger make sure that you always check the batteries for any sign of damage. If they are damaged please don’t reuse them.